Sagem / Safran MorphoAccess J Dual Fingerprint Reader with Card Reader

This product is now discontinued and has been replaced by the Morpho Access Sigma Lite, for more details please click here

The MorphoAccess® J Dual fingerprint identification terminals are easy-to-implement access control devices with built-in Mifare and DESFire card readers

This product is now discontinued and has been replaced by the Morpho Access Sigma Lite, for more details please click here

The MorphoAccess® J Series fingerprint identification terminals are easy-to-implement access control devices. Combining stylish design and reliability, they bring the security of biometrics to any kind of installation, in prestige premises (corporate offices, buildings etc...) or outdoor environments.

Numerous features in a compact design
• Stylish, compact and ergonomic design with high quality finishing
• Easy installation: adapted to standard electric boxes, POE powered and configurable by USB flash drive
• Multiple interfaces: compatible with most current or legacy access control systems for standalone or networked operating modes
• Powerful capabilities: Morpho’s state-of-the-art optical sensor and biometric algorithms
• Unrivalled levels of security: configurable (down to 10-8) and steady FAR
• SSL on TCP/IP, WEP & WPA, anti-tamper hardware
• Robustness: suitable for outdoor environment (IP 65 rated)

Technical Characteristics
• Processor: 2 ARM9
• Biometric Sensor: Optical Sensor: 14x22 mm, 500 dpi, 256 grey levels
• Contactless Card Reader: MIFARE® (1K, 4K) and DESFire® (2K, 4K, 8K). If a card reader is NOT required, then please see the J Bio reader which is fingeprirnt identification only
• Database: 500 users (*2 templates) or 3,000 users (*2 templates) with license
• Biometric Performances: 0.6s in 1:1 authentication (J-Dual) ; 0.8s in 1:500 identification FAR: adjustable from 10-2 down to 10-8
• MMI: Multi-color LED, Multi-tone Buzzer
• Operating Modes; Standalone, Proxy or Networked Interfaces: Customisable Wiegand, Clock & Data, RS485, Relay, Ethernet 10/100 Base T, Wi-Fi in option
• Security: SSL on TCP/IP network, WEP and WPA encryptions Secure screws, anti-tamper & anti-pulling switches
• Power Supply: External 9V to 16V (250mA typical @12V) or Power Over Ethernet
• Physical Characteristics: WxHxD = 80x127x61.5mm (3.15“x5.0“x2.4“)
• Weight = 193g
• Operating Conditions: Temperature: -10°C to +50°C (14°F to 122°F)
• Humidity: 10% to 80%
• IP 65 (once wall-mounted)
• Certifications: CE, CB, FCC, RoHS, REACh
• PC Software Applications: MorphoAccess® Enrolment & Management System (MEMS), Morpho Integrator’s Kit (MIK)